Autogas Systems in New Generation Engines

Candan Mühendislik — technical content image

The use of autogas in EUR v engines is a matter that requires high sensitivity. LPG kit and installation are very important in the use of autogas in these engines. With the right product and correct installation, trouble-free use can be achieved for years. Lovato obd 2 autogas kit, specially developed for new generation engines, is ready for installation. LOVATO OBDII C Smart autogas kit, which provides high performance and trouble-free autogas use, has already become the most installed product in our service..

Autogas Conversion Steps

Autogas conversion is the process of adding some parts to petrol-powered vehicles and making the vehicle run on LPG or petrol when desired.

Parts used in autogas conversion:

Lpg Tank: With a wall thickness of 3.5 mm, it is approximately 6 times thicker than other fuel tanks and is very resistant to impacts and pressure. There are two types, bagel and cylinder, depending on their shape. The appropriate tank is determined according to the type of vehicle and luggage volume and is installed securely in the vehicle.
Multivalve (float): This part on the tank transmits the LPG in liquid form in the tank to the vaporizer. It is an important part that carries many safety elements. It prevents the gas from moving through the system by stopping it at any time, prevents danger by closing the gas inlet and outlet in case of an accident, and in situations that increase the pressure such as fire, the safety valve reduces the pressure by evacuating the gas and protects it from dangers.
Evaporator (regulator): LPG systems are systems that generally operate in the gas phase. In autogas systems, the evaporator serves to convert the LPG coming from the tank in liquid form into the gas phase.
Autogas Injectors:These are the parts used to spray LPG into the engine cylinders.
Electronic Control Unit (ECU): Its main function is to coordinate the fuel injection times of the injectors and ensure that the vehicle uses the ideal amount of fuel, thus being both performance and economical.
Fuel Switching Button: It is the part that can be mounted in a suitable place on the control panel of the vehicle, allowing the vehicle to run on LPG at any time or on petrol at any time, and showing the amount of fuel.
Connection Pipes: To ensure the passage of liquid LPG between the tank, regulator and injectors. Using copper pipes in the installation is very important for safety and long life.

These parts belonging to the autogas conversion system are installed on your vehicle within half a day on average, depending on the type of vehicle and the number of cylinders, and your vehicle is made operational with LPG within the same day.

Today, in addition to classical gas injection systems, LPG systems that spray liquid similar to the petrol system have begun to be installed. With liquid spray systems, the performance and economy of your vehicle increases slightly. On the other hand, gas phase products are preferred due to their high cost.

You can watch the details of the autogas conversion process in the video below, narrated by SaffetThc, one of the experienced names in the automotive industry.

Watch the installation video on YouTube

While you can enjoy your vehicle, whose autogas conversion process has been completed, you will also complete the legal procedures by completing the licensing process within 1 month.

Things to Do After LPG Installation - License processing procedures

HOW IS LPG PROCESSED FOR A LICENSE:

LPG installation documents (LPG technical project, invoice and documents) must be obtained in full from the authorized service where you had autogas conversion done.
You must make an appointment with the Sealing Unit of the Chamber of Mechanical Engineers (sealing must be obtained from the province where you have the installation done) and go to the station at the appointment time to obtain a "Sealing Report".
The vehicle must be inspected at any TüvTürk inspection station (you must make an appointment) along with the Leak Tightness Report.
Make an appointment with the Traffic Registration Office of your district and be present at the appointment time for the LPG license operation.
You can complete your transactions at the Traffic Registration Office with the LPG project, invoice, warranty certificate, leakage report (or licence), Vehicle Traffic Registration Application and Transaction Form and a sheet of license.
The new license will be delivered on the same day or the next day.

Category: news atiker brc brc prices brc autogas installation wholehearted engineering candan otogaz italian brc lavato lpg lpg conversion lpg autogas milan mimgas autogas autogas installation sequential system autogas installation on new generation engine

The use of autogas in EUR v engines is a matter that requires high sensitivity. LPG kit and installation are very important in the use of autogas in these engines. With the right product and correct installation, trouble-free use can be achieved for years. Lovato obd 2 autogas kit, specially developed for new generation engines, is ready for installation. LOVATO OBDII C Smart autogas kit, which provides high performance and trouble-free autogas use, has already become the most installed product in our service..

Autogas Conversion Steps

Autogas conversion is the process of adding some parts to petrol-powered vehicles and making the vehicle run on LPG or petrol when desired.

Parts used in autogas conversion:

Lpg Tank: With a wall thickness of 3.5 mm, it is approximately 6 times thicker than other fuel tanks and is very resistant to impacts and pressure. There are two types, bagel and cylinder, depending on their shape. The appropriate tank is determined according to the type of vehicle and luggage volume and is installed securely in the vehicle.
Multivalve (float): This part on the tank transmits the LPG in liquid form in the tank to the vaporizer. It is an important part that carries many safety elements. It prevents the gas from moving through the system by stopping it at any time, prevents danger by closing the gas inlet and outlet in case of an accident, and in situations that increase the pressure such as fire, the safety valve reduces the pressure by evacuating the gas and protects it from dangers.
Evaporator (regulator): LPG systems are systems that generally operate in the gas phase. In autogas systems, the evaporator serves to convert the LPG coming from the tank in liquid form into the gas phase.
Autogas Injectors:These are the parts used to spray LPG into the engine cylinders.
Electronic Control Unit (ECU): Its main function is to coordinate the fuel injection times of the injectors and ensure that the vehicle uses the ideal amount of fuel, thus being both performance and economical.
Fuel Switching Button: It is the part that can be mounted in a suitable place on the control panel of the vehicle, allowing the vehicle to run on LPG at any time or on petrol at any time, and showing the amount of fuel.
Connection Pipes: To ensure the passage of liquid LPG between the tank, regulator and injectors. Using copper pipes in the installation is very important for safety and long life.

These parts belonging to the autogas conversion system are installed on your vehicle within half a day on average, depending on the type of vehicle and the number of cylinders, and your vehicle is made operational with LPG within the same day.

Today, in addition to classical gas injection systems, LPG systems that spray liquid similar to the petrol system have begun to be installed. With liquid spray systems, the performance and economy of your vehicle increases slightly. On the other hand, gas phase products are preferred due to their high cost.

You can watch the details of the autogas conversion process in the video below, narrated by SaffetThc, one of the experienced names in the automotive industry.

Watch the installation video on YouTube

While you can enjoy your vehicle, whose autogas conversion process has been completed, you will also complete the legal procedures by completing the licensing process within 1 month.

Things to Do After LPG Installation - License processing procedures

HOW IS LPG PROCESSED FOR A LICENSE:

LPG installation documents (LPG technical project, invoice and documents) must be obtained in full from the authorized service where you had autogas conversion done.
You must make an appointment with the Sealing Unit of the Chamber of Mechanical Engineers (sealing must be obtained from the province where you have the installation done) and go to the station at the appointment time to obtain a "Sealing Report".
The vehicle must be inspected at any TüvTürk inspection station (you must make an appointment) along with the Leak Tightness Report.
Make an appointment with the Traffic Registration Office of your district and be present at the appointment time for the LPG license operation.
You can complete your transactions at the Traffic Registration Office with the LPG project, invoice, warranty certificate, leakage report (or licence), Vehicle Traffic Registration Application and Transaction Form and a sheet of license.
The new license will be delivered on the same day or the next day.

This article is from the Candan Mühendislik knowledge archive. Prices, offers and procedures reflect the date of publication. Please contact our team for current information.

Autogas Systems in New Generation Engines

Autogas Conversion Steps

Autogas conversion is the process of adding some parts to petrol-powered vehicles and making the vehicle run on LPG or petrol when desired.

Parts used in autogas conversion:

Evaporator (regulator): LPG systems are systems that generally operate in the gas phase. In autogas systems, the evaporator serves to convert the LPG coming from the tank in liquid form into the gas phase.

Autogas Injectors:These are the parts used to spray LPG into the engine cylinders.

Electronic Control Unit (ECU): Its main function is to coordinate the fuel injection times of the injectors and ensure that the vehicle uses the ideal amount of fuel, thus being both performance and economical.

Fuel Switching Button: It is the part that can be mounted in a suitable place on the control panel of the vehicle, allowing the vehicle to run on LPG at any time or on petrol at any time, and showing the amount of fuel.

Connection Pipes: To ensure the passage of liquid LPG between the tank, regulator and injectors. Using copper pipes in the installation is very important for safety and long life.

These parts belonging to the autogas conversion system are installed on your vehicle within half a day on average, depending on the type of vehicle and the number of cylinders, and your vehicle is made operational with LPG within the same day.

You can watch the details of the autogas conversion process in the video below, narrated by SaffetThc, one of the experienced names in the automotive industry.

While you can enjoy your vehicle, whose autogas conversion process has been completed, you will also complete the legal procedures by completing the licensing process within 1 month.

Things to Do After LPG Installation - License processing procedures

HOW IS LPG PROCESSED FOR A LICENSE:

LPG installation documents (LPG technical project, invoice and documents) must be obtained in full from the authorized service where you had autogas conversion done.

You must make an appointment with the Sealing Unit of the Chamber of Mechanical Engineers (sealing must be obtained from the province where you have the installation done) and go to the station at the appointment time to obtain a "Sealing Report".

The vehicle must be inspected at any TüvTürk inspection station (you must make an appointment) along with the Leak Tightness Report.

Make an appointment with the Traffic Registration Office of your district and be present at the appointment time for the LPG license operation.

You can complete your transactions at the Traffic Registration Office with the LPG project, invoice, warranty certificate, leakage report (or licence), Vehicle Traffic Registration Application and Transaction Form and a sheet of license.

The new license will be delivered on the same day or the next day.

Autogas Conversion Steps

Autogas conversion is the process of adding some parts to petrol-powered vehicles and making the vehicle run on LPG or petrol when desired.

Parts used in autogas conversion:

Evaporator (regulator): LPG systems are systems that generally operate in the gas phase. In autogas systems, the evaporator serves to convert the LPG coming from the tank in liquid form into the gas phase.

Autogas Injectors:These are the parts used to spray LPG into the engine cylinders.

Electronic Control Unit (ECU): Its main function is to coordinate the fuel injection times of the injectors and ensure that the vehicle uses the ideal amount of fuel, thus being both performance and economical.

Fuel Switching Button: It is the part that can be mounted in a suitable place on the control panel of the vehicle, allowing the vehicle to run on LPG at any time or on petrol at any time, and showing the amount of fuel.

Connection Pipes: To ensure the passage of liquid LPG between the tank, regulator and injectors. Using copper pipes in the installation is very important for safety and long life.

These parts belonging to the autogas conversion system are installed on your vehicle within half a day on average, depending on the type of vehicle and the number of cylinders, and your vehicle is made operational with LPG within the same day.

You can watch the details of the autogas conversion process in the video below, narrated by SaffetThc, one of the experienced names in the automotive industry.

While you can enjoy your vehicle, whose autogas conversion process has been completed, you will also complete the legal procedures by completing the licensing process within 1 month.

Things to Do After LPG Installation - License processing procedures

HOW IS LPG PROCESSED FOR A LICENSE:

LPG installation documents (LPG technical project, invoice and documents) must be obtained in full from the authorized service where you had autogas conversion done.

You must make an appointment with the Sealing Unit of the Chamber of Mechanical Engineers (sealing must be obtained from the province where you have the installation done) and go to the station at the appointment time to obtain a "Sealing Report".

The vehicle must be inspected at any TüvTürk inspection station (you must make an appointment) along with the Leak Tightness Report.

Make an appointment with the Traffic Registration Office of your district and be present at the appointment time for the LPG license operation.

You can complete your transactions at the Traffic Registration Office with the LPG project, invoice, warranty certificate, leakage report (or licence), Vehicle Traffic Registration Application and Transaction Form and a sheet of license.

The new license will be delivered on the same day or the next day.